DSE855

USB to Ethernet Communications Device

The DSE855 communications device allows monitoring of a single DSE controller with USB connectivity over a LAN or WAN connection. To achieve this the DSE855 utilises its in-built web server or MODBUS TCP. In order to use over a LAN connection the on-site router must be configured to be accessible from any global location.

Works with:

Auto Start:
DSEL401MKII/DSE4310/DSE4410/DSE4510/DSE4610/DSE6010 MKII/DSE6110/DSE6610/DSE7110 MKII/DSE7210/DSE7310

Auto Mains (Utility) Failure:
DSE4320/DSE4420/DSE4520/DSE4620/DSE6020/DSE6120 MKII/DSE6620/DSE7120MKII/DSE7220/DSE7320

OVERALL SIZE
35 mm x 97 mm x 102 mm (1.4” x 3.8” x 4.0”)

WEIGHT
0.16kg

Description

Product Highlights

Converts a USB port to an Ethernet port.

In-built web server.

Simple Internet browser configuration.

Remote control & monitoring for all connected modules.

MODBUS TCP support via Ethernet.

Can be viewed from four separate locations simultaneously.

Full building management system integration.

Firmware upgradeable.

DIN rail mount.


Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
123 mA at 12 V
71 mA at 24 V

MAXIMUM STANDBY CURRENT
104 mA at 12 V
63 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller)
Ethernet