DSE890 MKII

DSEWebNet® Gateway – 4G (GSM/Ethernet)

The DSE890 MKII is an Ethernet/4G gateway device that enables compatible DSE controllers to be monitored remotely via DSEWebNet®.

REQUIRES – Combined 4G LTE (Main & Diversity) and GPS Antenna – 020-1053
The DSE890 MKII connects to the control module (s) to be monitored. It is then connected to a network and assigned an IP address. Once an IP address is assigned, the user can add a new site location to their DSEWebNet® account and begin monitoring remotely via any Internet connection or by using the mobile app.

OVERALL SIZE
85 mm x 149 mm x 51 mm (3.4” x 5.9” x 2.0”)

WEIGHT
0.23kg

Description

Product Highlights

4G Connectivity.
Provides a high-speed connection for data transfer on remote sites.

Configure device to be monitored using DSEWebNet® software.
Users can configure individual sites using the online version of DSEWebnet®.
Once sites are configured the DSEWebNet® web interface and app can both be used for control & monitoring.

DIN rail & chassis mount.
Provides flexible mounting options.

Multiple users can access each DSE890 simultaneously.
Allows multiple DSEWebNet® connections to monitor the same site simultaneously.

Main & diversity aerial connection inputs.
Enables the signal strength to be increased by adding a second aerial to the installation.


Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 36 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 100 mS, providing supply was at least 8 V before dropout and supply recovers to 8 V. This is achieved without the need for internal batteries

MAXIMUM OPERATING CURRENT
GSM                      755 mA at 12 V
376 mA at 24 V
GSM & GPS         755 mA at 12 V
376 mA at 24 V

MAXIMUM STANDBY CURRENT
GSM                      207 mA at 12 V
113 mA at 24 V
GSM & GPS         207 mA at 12 V
113 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller)
RS485 (Multiple DSE Controllers)
Ethernet (Multiple DSE Controllers)
CAN* (Single DSE Controller)