DSE892

Simple Network Management Protocol (SNMP) Gateway

The DSE892 connects DSE control modules to external SNMP systems. Once a connection is made full monitoring and control functionality becomes active. The gateway device specialises in monitoring the instrumentation and operating state of the connected DSE control module.

OVERALL SIZE
85 mm x 149 mm x 51 mm (3.3” x 5.8” x 2.0”)

WEIGHT
0.24kg

Description

Product Highlights

Multiple DSE control module compatibility.

Communication port status LEDs.

DIN rail mount.

Plug & socket connections.

Auto generated Email/SNMP TRAP messages when control module events and operarting changes take place.

Customisable Email/SNMP TRAPs based upon module instrumentation values.

Simple Internet browser configuration.

SMTP client email.

Automatic MIB file generation to ease system integration.

Single DSE892 gateways can be connected to multiple control modules.

SNMP SET to change controller mode.

SNMP GET for instrumentation.

SNMP V2 compatibility


Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V Continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 8 V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained during cranking.

MAXIMUM OPERATING CURRENT
200 mA at 12 V
110 mA at 24 V

MAXIMUM STANDBY CURRENT
150 mA at 12 V
90 mA at 24 V

COMMUNICATIONS

USB (Single DSE Controller)
RS232 (Single DSE Controller)
RS485 (Multiple DSE Controllers)
Ethernet (Multiple DSE Controllers)
Ethernet SNMP & SMTP