DSE402MKII

Waterproof Manual & Auto Start Control Module

The DSE402 MKII is a waterproof Auto/Manual Start Control Module designed for generator and engine only applications. The intelligent design combines smart features with a waterproof key switch and enclosure to provide an excellent control option for wet/humid environments.

OVERALL SIZE
157 mm x 111 mm x 60 mm (6.2” x 4.4” x 2.4”)
Excludes Key Switch

PANEL CUTOUT SIZE
132 mm x 84 mm (5.2 ” x 3.4″)

MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)

WEIGHT
0.45kg

Description

Product Highlights

Front panel waterproof key switch.
Ensures the generator can only be operated when the key is used and prevents water ingress.

Potted electronics.
Prevents water ingress and vibration damage.

Low oil pressure protection.
Protects engine from long-term damage.

Remote start input.
Provides a simple connection to operate the generator from a remote location.

Engine pre-heat.
Warms the engine to a safe temperature at start-up to increase engine life.

LED status indication.
Provides instant system status from the front panel.

Over speed & high engine temperature protection.
Protects engine from long-term damage.

DSE Configuration Suite Lite PC Software (DSE813 required).
Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.


Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.

MAXIMUM OPERATING CURRENT
120 mA at 12 V, 170 mA at 24 V

TYPICAL OPERATING CURRENT
60 mA at 12 V, 75 mA at 24 V In stop position consumption is zero.

CHARGE/FAIL EXCITATION RANGE
0 V to 35 V

OUTPUTS

FUEL
15 A DC at supply voltage

START
15 A DC at supply voltage

PRE-HEAT
2 A DC at supply voltage