DSE701MKII

Manual & Auto Start Control Module

The DSE701 MKII is a compact control module that offers a range of features for single-set applications. The controller can be used in manual or auto start mode.

OVERALL SIZE
72 mm x 72 mm x 38 mm (2.8” x 2.8” x 1.5”)
Excludes Key Switch

PANEL CUTOUT SIZE
68 mm x 68 mm (2.7 ” x 2.7″)

MAXIMUM PANEL THICKNESS
8.0 mm (0.3”)

WEIGHT
0.14kg

Description

Product Highlights

Front panel key switch.
Ensures the generator can only be operated when the key is used.

Configurable for use as a manual or auto start control module.
Helps to reduce module variants held in stock.

Auxiliary shutdown input (manual mode only).
Provides a simple input for a remote stop switch.

LED status indication.
Provides instant generator operating status.

Engine pre-heat.
Warms the engine to a safe temperature at start-up to increase engine life.

Engine monitoring & protection.
Protects engine from long-term damage.

Over speed protection.
Prevents engines running too fast and becoming damaged.

DSE Configuration Suite Lite PC Software (DSE813 required).
Provides complete user-friendly configuration and easy-to-use high-level system control & monitoring.

Monitors battery charging status using the WL terminal on the charge alternator.
When the battery has a charging fault the module illuminates an LED on its front panel.


Specification

DC SUPPLY

CONTINUOUS VOLTAGE RATING
8 V to 35 V continuous

CRANKING DROPOUTS
Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without internal batteries.

MAXIMUN OPERATING CURRENT
26 mA at 12 V, 27 mA at 24 V

MAXIMUM STANDBY CURRENT
20 mA at 12 V, 21 mA at 24 V

CHARGE/FAIL EXITATION RANGE
0 V TO 35 V

OUTPUTS

START
Solid state 1.2 A negative grounding terminal

RUN
Solid state 1.2 A negative grounding terminal

PRE-HEAT
Solid state 1.2 A negative grounding terminal

GENERATOR

VOLTAGE RANGE
15 V – 333 V AC (L-N)

FREQUENCY RANGE
3.5 Hz to 75 Hz